Extended Travel CV Axle Half Shafts

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Fire

Member
Joined
Aug 29, 2020
Messages
13
Reaction score
7
Location
Arizona
I posted this in the Explorer forum, but thought there might be Sport Trac guys like me that like to offroad.

I was checking into Trakmotive and their extended travel CV axles they now offer. They don't list them for front SLA IFS Ford Ranger/Explorer/Sport Trac, but I got word from their sales rep that they are working on it for this year. Coverage would be 00-10 Ranger, which would also fit the 01-05 Sport Trac, and maybe some 95-01 Explorers. Here is their flyer:

03/2020: New Extended CV Axles Designed Specifically for Lifted Vehicles | TrakMotive

Sounds like great news, as I tend to get some binding or clunk when I am on the trail and maxing out the stock CV axle travel.
 
I see more of a market for Diff drop brackets But ya never know.
 
That'd make sense too, and honestly more practical. Work on rangers, 2nd gen explorers
So a diff drop bracket to go along with a suspension A-arm lift, right? But they come with diff drop brackets.
Can't do it alone can you? Gotta drop the lower A-arm as well or the CV shaft coming out of the dropped diff wont clear. Unless I'm missing something, which is likely.
 
Update on the extended travel and angle cv axles --

I just checked their website this evening out of idle curiosity and bam! Trakmotive has added P/Ns for Ranger/Explorer/Sport Trac on their updated product flyer!

Product Info

I haven't found the P/Ns listed at any retailers yet, but I emailed Trakmotive for more info on how to order them. I'll update as soon as I hear.

As some have known for years, when the front is jacked up and the stock suspension is at full droop, one or both cv axles will bind when you try to spin the wheels. And then having the steering turned makes it worse.

I was doing some wheeling/crawling this last weekend and worrying about my CV axles binding and maybe breaking with the jeep trails I was on. The clunking they do sometimes with just the right combination of suspension travel and steering angle is pretty loud. I read somewhere about having the sway bar attached can help, so I've been trying that as an insurance policy.

Heck I've swapped out the DS CV axle between an OEM unit and cheap replacement, and they behaved the same. It's just kinda sad that we only have 5" of front travel to start with, and then actually less because of binding before it gets to full travel.

So my dream is that I can get full droop and steering turn, and maybe shave the bump stop some for more compression.
 
Good to know. I believe the precision brand from oreillys is reboxed trakmotive. Hoping they will stock these too or have them available.
 
Got a email back from Trakmotive:

Thanks for your interest in our XTT axles. Those particular axles aren’t available quite yet. I would say within the next month or so. When they are released but your local auto parts store should be able to order the axles from their nearest distributor. TrakMotive products are also available online through e-tailers.
 
Anyone know of a diff drop bracket or anything else?
 
Anyone know of a diff drop bracket or anything else?
If i was going to go through all that, i would just get a 5" rough country lift for a ranger and use the front parts and do a spring over axle flip on the back
 
Or call up rcv and talk to them about building a custom set for you. Most definately not cheap, i paid about $2500 for the set i put in my old 2 door tahoe i had with 7.5" suspension lift and 37" tires. Never had a problem.
 
I mean, Could we third world this ???
Take the OEM axle, Cut it in the middle, Completely weld a sleeve over it to an extend length. Have a CV shop balance it?
Or have them do the work?
 
While the shafts need to be longer, its the angle that kills them. Yes, lengthening the center shaft will change the angles some, but not enough. If all you wanted is longer shafts, i would get a machine shop to make new center shafts out of chromemoly to the needed specs(i would do it myself, but i dont have access to a horizontal mill and tooling to make splines). And for what that cost, i believe you could do the rough country ranger lift up front and soa the rear. I can speak to the durability of the rcv shafts. They held up great in my 6k lb tahoe with a hot 383 under the hood, 37" tires and my lead foot...lol cant say that for the tie rids and ball joints though...had to replace one or the other ever couple of months.
 
Yup, That's why i suggested making longer diff brackets, Then a longer front drive shaft.
 

Latest posts

Top