Recent content by JerryRigour

I’m with Todd on this one. My Gen1 had a frayed cable so the lock cylinder wouldn’t unlock the front half of the cover. Whenever I wanted to remove the cover, I just laid in the bed and pushed the part on each side with a screwdriver. Maybe you were trying to push it the wrong way? I can’t even...

Location?

Hey RT, you never emailed me back about my chrome grille. Not in good enough condition? It’s not perfect, but it only had 52k miles on it, I doubt there are much better. All good if you’re looking for another

First pic is the initial install and alignment of BTF and Truxxx. Second pic is with new wheels and tires + alignment, upgrade to 32”. Stock suspension. To me it looks like there is less of a camber issue with the bigger tires, I told the 2nd shop about the issue beforehand and I think they...

I actually got the BTF UCA and it still has a camber issue. Can’t get a perfect alignment, two different shops have confirmed this. It’s very close though, and obviously a beefier component that with withstand much more than OEM. I emailed BTF about it and they were going to “look into it” and...

Thanks, at least it gives me a ballpark! Although I have a gen2 despite my bed rack example picture being a gen1. Even if it’s half that, 4 tie downs at 350 each should be plenty for that bed rack.

I’ve never pulled the trigger on the bed rack because I want to level it with my roof rack. Plus, I can’t find the weight limits for the tie downs—I’d like to know that first. Can’t seem to find the metric.

I’ve had this same issue. I’ve put it on the back burner because I have other project ideas to spend my money on in the meantime. Prinsu pissed me off, I’ve emailed them twice about something that would fit around the roof rails and both times the pricks responded with, “we have some that would...

Don’t tempt me like that!

DM’d you

Do you have any hardware for it?

2010 gen2 XLT 4x4 I’m looking to upgrade my gear ratio once I get bigger tires, and in that same project I want to install an E locker in the rear diff. This project is quite complex, and I’ll likely get a 4x4 shop to do it, but I’m curious if there are any major conflicts with doing so...

I know there’s a guy selling one on Facebook. His name is Andrew Dykeman out of eastern Canada, “Ford Explorer Sport Trac Owners” group. Might have sold it by now, idk

Hey Robert, I recently saw one posted in the Salt Lake City, Utah area. It is listed for $16,000, with 118k miles. 2010

@rtbehm any chance you’ve got a link? Looking for an exhaust upgrade and it’s a headache finding a proper match.