Todd Z's latest activity

Sadly this could be MANY things from a vacuum leak, to a bad injector, to a burnt wire to many other things. Replacing the sensor is...

They don't last forever anymore and are not cheap, the other issue is buying quality timing parts, Ford has discontinued most of it. So...

Welcome, Its slow here but good info.

Ebay, or call junkyards.. the trucks are nearing 20 years old, parts are going bye bye

Welcome, ITs slow here but good info.

1.25 should be good, I went with a slightly wider tire as I like my paint and mud flaps as i like my frame...lol she does good. if...

I believe the rear bed port is always active, Can charge through the rear 12V plug at low amps.

no, no and I dont know, trial and error. These trucks really are not handling machines.

the filler necks rot out too, have to check that. The 1/2' trim is of the hose fell of the elbow, not at the top and cracked...

Oem rims or rims with pockets for the studs, i would not go more than 1.25".... 1.5 max.... on my black truck i went 1.25 front, and 1.5...

I answered your other post...... Stuck in park is the common broken shifter rod....

IF its oem, it slides back too.... could be the switch, motor or something else.... did you try holding the switch the other way ?

Welcome, Good info here but slow. Check the trans fluid level and condition, These trucks are old..... things don't last forever any...

Take off the door panela and remove the handle ?? My wife drives our Gen 2 now so yeah no measuring.

Welcome