Recent content by Vin Man

I have been entering code properly. The 1/2 button is not registering. I removed the keypad and cleaned all the contacts. That did not fix it. I replaced the keypad with a new one and that did not fix it. It's down to a wire problem (the wire that corresponds to the 1/2 button) or the BCM...

Looks like the 1/2 button is not making contact. Lights come on with the other 4 buttons but not the 1/2. Next step will be to remove door panel, take out switch and check connections.

I will try as you suggest and press each button at night and see if I noticed the keypad lighting up Sent from my Pixel 2 using Tapatalk

No. The master code (which is the only code I have) does not work. Yet some of the keypad does work as I can lock the doors using the keypad which tells me buttons 7/8 and 9/0 definitely do work.

Previous owner did not have a code/use the pad. only code I have is the one on the card that came with the user manual which is the same code printed on the electronic module behind the passenger airbag.

I was thinking this could be an issue as well. If one of the first three buttons is not working (my code requires them), that would explain why the code doesn't read, but the doors can lock (last 2 buttons do work).

I will go to ford and see if they can read it. I didn't believe the original code could be changed.

I removed the negative cable for about 10 minutes. Did not have an effect. Sent from my Pixel 2 using Tapatalk

Will do and I shall report back here. I did search the forum and found someone had a similar problem, but the resolution was not posted. Thanks.

Hello everyone. I recently purchased a 2002 Sport Trac (Limited?) with 4WD. The prior owner never used the keypad and I wanted to program my own code into it. I have the original programming code which was not only on a card in the glovebox, but also matched the one on the module behind the...