Search results

Welcome to the site.

Welcome to the site.

Most factory parts are discontinued. You might be able to find what you're looking for on eBay.

Welcome to the site. Did the Catalinas get a lot of snow this year?

They're light. Made of aluminum, about 15-20 lbs.

Nice work, but I think you need to get the soldering gun a little hotter. The globs that are not smooth are the give away. A little more heat and the glob will flow, has nothing to do with shaky hands, you did keep the solder with the resistors, so nice work.

Installed a new T/S wiper switch that angles up instead of down. https://sporttrac.org/threads/turn-signal-switch.124400/ Before... you can see the T/S switch below the headlamp switch. After.... and now you don't

Ok, I will confirm this does work with the switch I listed above. Hazards, blinkers, washer and all wiper settings work as designed. Before... you can see the T/S switch below the headlamp switch. After.... and now you don't To start, remove the lower panel, there are (4) 1/4" head...

Welcome to the site. This site lists that 2001-2005 are the same...

Any particular brand? I know there is a few different ones out there.

I've been doing some research on seeing if I can replace my turn signal switch with one that is bent in the opposite direction. I read on FB that a Ranger owner swapped theirs with a F-150. The purpose is really only to keep my left knee from hitting the arm while driving. The individual...

I'd like to find out more on the light bar. As of 3 weeks ago. When I first got the ST

Welcome to the site. Great looking ST. You know 🤔 I think I remember hearing that new members from KC are supposed to share BBQ with everyone on the site. 😁 just kidding. Welcome again.

Welcome to the site.

So just out of curiosity, what makes the decision for the body trim? I though at first it was to match the interior but after searching it doesn't make sense. I've seen body trim in black, gray, tan, and color match, then the interior in the same 3. (dark graphite, medium graphite, and...

https://sporttrac.org/threads/tailgate-came-off.91410/

Looks like a return line to the pump or to/from the p/s cooler if equiped.

Welcome to the site. When you start your tinkering, create a build/tinkering thread... With lots of photos.

There are shops that are strictly for drivelines. A good example to help is to check to see if the u-joints are all inline with each other. Having a dealer replace the bearing, I would chance to say that it was done correctly, but not guaranteed. As far as vibrations, bad transmission mount...

Welcome to the site. Rockauto has them... https://www.rockauto.com/en/catalog/ford,2004,explorer+sport+trac,4.0l+v6,1427789,brake+&+wheel+hub,brake+backing+plate+/+dust+shield,1628