Search results

After constantly P0301 and P0174 finaly i changed the Injectors one Bank 1. last year i posted the error messages and after change the sparks pklugs, the wires and the coil pack, just the injectors are left. Last week finaly i did it and now the Trac runs freaking smoth. No stalling in the lower...

Hi all, Just out the blue sky I got several error codes. I am thinking this is some electrical issues? Car Scanner ELM OBD2 DTC report Selected brand: Ford ============1============== P0056 Raw code: 0056 ECU: 10 Status: Confirmed Heated oxygen sensor (HO2S) 2, bank 2, heater control -...

I have one little ticking noise when I am just stay one red light, not when I am driving.. Listen to the attachment.. it's comes from the right inner site, so i think is bank1? or maybe lifters?

Did some from you guys know what screw size this is? I missing 2 screws here..

After I changed the radiator I found just another spot drop, not sure where this comes from.See pictures below..

I thinking about to purchase this type of Sparkplugs for my Trac. Did someone has some expirence with this model? NGK Laser Platinum Spark Plug PTR5F-11 (6 Pack) for FORD EXPLORER SPORT TRAC XLS 2003-2005 4.0L/245

I like to change my leaking Radiator and i found this: https://www.amazon.com/LUXERAD-Aluminum-Radiator-1998-2011-Explorer/dp/B09MTGW5D7?th=1 this should be fit in my 2002 Ford Explorer Sport Trac? right? Did i need something else when i replace him? Any ideas? thanks

At idle, my engine shake's a lot..see little video, not sure why, still have the 2 constantly codes..P0301 and P0171. Changed everything, so I am just ignore it.

For the last couple months my cruise control was not working. I changed the control switch, checked all the wires... nothing. For some reason I did something one my truck and this little piece was hold the second cable on the throttle body broke, so the cable was no longer attached. Today, for...

Changed the starter and still will not start, I hear the relay clicking the pump summing and here the codes from forscan....

After replacing thermostat housing and took intake off, just replaced O2 sensor driver side, truck will start very bad, I need to wiggle the key many times..see little video And I replaced the coil pack 2 days ago....

After I reinstalled my intake manifold I got this little red vacuum line and cannot find where is belongs to...

This morning after 6 miles I stopped by the gas station and some light smoke came out the hood.I opening the hood and see wet around the throttle body and smoke. The water temperature going up.When I came home I did this video.. Please let me know what you think, maybe it's just the...

I know I still have the code p0301 and p0171, the truck runs fine..it's just vibration...see video attached, is it possible that's the engine mounts need to be replaced? And some water dripping out the pipe..

The truck runs great but sometimes it's idles thought.. Today I got some strange codes..

After I reset my pcm and changed all I think about code 0301 and 0171 everything was fine for 4 days, now the codes are back, and one thinking noise from the engine one the passenger side, it's so strange..

I replaced everythink you can do what is connected to the codes, i think...PVC valve, elbow, new fuel line, new vapor line, new spark plugs , new spark plug wire, new coilpack.... and then the injectors are left...last weekend i took the entire Bank 1 fuel rail out, cleaned the injectors and...

I got some cooling spells on the grill in front of the engine, but doesn't see any leak..

After replacing O2 sensor, upstream 11, I get 3 error codes

After new spark plugs, cables and ignition coil, new rear main seal, new gaskets on oil pan, intake manifold, exhaust manifold, camshaft covers, new fuel pump, new fuel filter, new PVC elbows and new PVC valve.... Still get the codes 0301 and 0171.. what is missing?