1st Gen on tons and 40s

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jonzer12

Member
Joined
Mar 17, 2023
Messages
3
Reaction score
14
Location
Canada
What engine do you have?
V6 engine
What year is your Sport Trac?
2005
What Generation is your Sport Trac?
1st Gen Owner
Quick overview of my build. I wrote off my jeep of 12 years in a trail mishap and I wanted something the same width as a jeep but with 4 doors, a small bed and a frame. After looking at Tacomas, frontiers and sport tracs, I settled on a 05 adrenaline. Got it for a $1000 bucks with only 80k miles on it. 1 owner. I did an solid front axle swap using F350 axles. Dana 60 and ford 10.25. 5.38 gears and elocker. SAS was done using a trailgear toytoa steering box on the outside of the frame and Early brono coils with a 3 link long arm suspension. 40" toyos on raceline beacklocks finished it off. There were literally the only 40" tire available during covid but I have grown to like them.

First trip out of the garage
285025700-4913037632136127-8456374024832857753-n.jpg

295945699-5068960153210540-8568489796541313685-n.jpg

310623792-5266312540141966-1532120749904520091-n.jpg


343655463-704339061691607-6231934769244697255-n.jpg

345446791-269415445515453-3884118130548939322-n.jpg

my-sport-trac.jpg
 
Welcome to the Herd!
Looks like one mean machine!
 
Congratulations on the steroidal departure from stock! Obviously a great deal of talent and resources invested. There is no metric for FPG, fun per gallon.
 
Thanks everyone it works great. I have just added rocker protection and my made my old jeep rear bumper fit. The only real issue I have now is the lack of horsepower and the stock power steering pump doesn't put out enough volume for quick steering response with my PSC ram. I have a PSC cbr pump but there is no way to make it fit on a 4.0 SOHC. To solve both problems I picked up a low mile 07 GMC sierra with rusted rockers and cab corners for cheap. I will do an LS swap next winter. I have just about everything figured out except for the A/C. I think I can just make a custom line to adapt the GM compressor to the factory A/C system and I just need to figure out a way to get a signal to the GM harness that the A/C is on. Anyone on this forum do an LS swap? Lots of rangers have been done which is where I copied most of my plan from.
 
Nice build..looks like sooo much fun..
 
another weekend in the books
 

Attachments

  • 351797786_293092759753042_9204193474282107983_n.jpg
    351797786_293092759753042_9204193474282107983_n.jpg
    118.2 KB · Views: 0

Latest posts

Top