20" rims, +35 offset?

[chris smith 5]

Last week I ordered new wheels, It didnt dawn on me until now to check the offset before they arrive and sure enough they sent +35. The rims are 8.5" and the tires are 285/45. Anyone running a +35 offset? I assume I will have to get some damn big spacers (2") to make these things fit without rubbing a hole in the fender well..... any input?

 

[Josh OH]

Your going to DEFINATELY get some wheel spacers and STILL pray that they fit... I have +12mm offset wheels and I BARELY rub, but then again I have a little larger tire.

Just my imput..

~Josh

 

[chris smith 5]

+12 rubs huh, Thats the factory offset right? What size tire?



If +12 rubs I'm pretty much screwed!

 

[Chris Kulbaba]

I have 20" 9.5" wide wheels with a +15 offset and the fit perfect, I wouldnt go any more than that, I notices at first there was a slight rubbing in the REAR, and it was just hitting the plastic, it wore off in about an hour of driving, and havent had a problem since...

 

[Jeff C]

I have 17x8.5 with +29.5mm offset and 265/70/17 tires, and I only rub at full turn.

 

[Josh OH]

At full turn I rub in the front, but only because I cut the back of my fender well a little. I also have a TT on the front of the truck 1" for clearance. I really don't think that your rims are going to fit unless you get spacers or raise the truck.