Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Doug Kaye" data-source="post: 1049391" data-attributes="member: 73761">see previous thread, [URL unfurl="true"]https://sporttrac.org/threads/anybody-else-replaced-wheel-bearings-5-times.86588/#post-748864[/URL]I replaced both my front wheel bearings with Timken from RockAuto. One rotor was replaced and those bearings have been fine for about 40k now. The other reused the old rotor.  The Timkens came with matched races but I couldn't get the old races out of the rotor.. About 10k so far on that. The new bearings seemed to be OK with the old races, no play I could feel and fitted right in. At next replacement I'll just put in a new rotor too. On that first replacement I got something wrong. After about 10k the wheel wobbled noticeably when I was rotating tires, went in and found the nut was not at the right torque and the bearings were loose. Retightened to torque spec and it's been fine since then.</blockquote>