2009 Adrenaline Headlight Replacement - Eagle Eyes

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

KCK

Member
Joined
Jul 24, 2024
Messages
17
Reaction score
9
Eagle Eyes FR457-B101L and B101R

30 Minute Job that's super easy.

3ea 10mm bolts to remove and its plug and play. The lowest bolt doesn't get removed. Just loosen it and the old/new light will slide in/out
 

Attachments

  • PXL_20240729_160908315.jpg
    PXL_20240729_160908315.jpg
    2.8 MB
  • PXL_20240729_165134568.MP.jpg
    PXL_20240729_165134568.MP.jpg
    4 MB
  • PXL_20240729_165143179.jpg
    PXL_20240729_165143179.jpg
    2.1 MB
  • PXL_20240729_165203848.jpg
    PXL_20240729_165203848.jpg
    3.1 MB
They will fade in 2 years.... Eagle eyes suck..... CAPA certified are the way to go.
 
Eagle Eyes FR457-B101L and B101R

30 Minute Job that's super easy.

3ea 10mm bolts to remove and its plug and play. The lowest bolt doesn't get removed. Just loosen it and the old/new light will slide in/out
Do you have to realign the headlight beams after a swap like this?
 
Do you have to realign the headlight beams after a swap like this?
I haven't even driven it at night yet so I'm not sure. It looks like a reasonably easy job to readjust if they need it though.
 
I haven't even driven it at night yet so I'm not sure. It looks like a reasonably easy job to readjust if they need it though.
I've been planning on replacing mine also, so I was curious. I plan to park a moderate distance away from my closed garage door and mark my current beam alignments on it with blue tape. After replacing the headlights, I'll compare the new beam locations with the old locations.
Just wondering if I need to go to all that trouble.
 
Do you have to realign the headlight beams after a swap like this?
Normally a small adjustment is needed, But that's easy...
 
Like Todd said, some adjustment is needed with new headlight assemblies, but not much. A few years ago I made up my own bi-xenon projector headlights and used the method you described to get the initial adjustment for the new lights by comparing the blue tape position I made before removing the old lights. The distance to my markings was about 25ft to the truck.
 

Attachments

  • IMG_E3939.2.jpg
    IMG_E3939.2.jpg
    411.4 KB
  • IMG_E3974.2.jpg
    IMG_E3974.2.jpg
    376.8 KB
  • IMG_E3948.2.jpg
    IMG_E3948.2.jpg
    343 KB
  • IMG_E3946.2.jpg
    IMG_E3946.2.jpg
    232.4 KB
  • IMG_E3983.2.jpg
    IMG_E3983.2.jpg
    249.3 KB

Latest posts

Top