brandon mena
Well-Known Member
Well, I haven't heard back so here they go.
Fabtech 3" Lift Spindles with rotors, bearings, seals, etc. Assembled.
Extended Torsion Adjuster Bolts
I had this on with no problems. I recommend changing balljoints if necessary because it is more convenient to get it over with during the install. This should get you over 35"s and the ride is a little stiffer but I quickly got used to it. Lasted me a good 6 months or so but I'm going to try something else now.
35" x 12.5" Tires on 15" x 10" Wheels
Here's a pic.
[Broken External Image]:
There's more of them and the truck in my llibrary.
Anyone interested?
Fabtech 3" Lift Spindles with rotors, bearings, seals, etc. Assembled.
Extended Torsion Adjuster Bolts
I had this on with no problems. I recommend changing balljoints if necessary because it is more convenient to get it over with during the install. This should get you over 35"s and the ride is a little stiffer but I quickly got used to it. Lasted me a good 6 months or so but I'm going to try something else now.
35" x 12.5" Tires on 15" x 10" Wheels
Here's a pic.
[Broken External Image]:
There's more of them and the truck in my llibrary.
Anyone interested?
Last edited by a moderator: