Adjustable rear control arms

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Larry7drew

Member
Joined
Mar 23, 2024
Messages
1
Reaction score
0
Location
Taylorsville NC
What engine do you have?
V6 engine
What year is your Sport Trac?
2007
What Generation is your Sport Trac?
2n Gen Owner
IMG_8267.jpeg

I bought my 2010 Adrenalin about a month ago. Just wondering if anyone makes rear adjustable control arms to adjust the camber. The truck is lowered about an inch and the wheels are tilting in at the top. Any advice would be appreciated.
 
Welcome to the site.
 
These are replacement up date part for the 2011 to current explorer lower rear control arm
There very close to directly fitting your need, you will need to drill the 14 mm bushing and clevis to 16 mm and shorten the threaded buckle a bit. Simple.
 

Attachments

  • image.jpg
    image.jpg
    3.1 MB
  • image.jpg
    image.jpg
    2.8 MB
  • image.jpg
    image.jpg
    3.2 MB
  • image.jpg
    image.jpg
    1.1 MB
They used to make them, None around. Only what STT did above is the only option, ALSO check your rear bearings, you'd be surprised how many I've seen bad cause this too.
 
Top