ARE Tonneau Cover Lock Cylinder replaced

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tombstones81

Active Member
Joined
Feb 18, 2020
Messages
161
Reaction score
66
Location
18634
Another thread weeks ago reminded me to look for a new lock for my cover. (05 ST)
As I did not get a key when I bought the truck.

Just tossed this one in & its a straight easy swap.
Quality keys as well (expected thin & cheap garbage)
Its actually the same quality as the oem truck keys!

https://truckoutfittersplus.com/are-tonneau-cover-lock-cylinder.html
In case anyone's been looking or forgetting to look.
 
I have the same lock for my cover as I do for my truck's doors and ignition. HOWEVER, I just bought this truck 2000 miles ago, and they told me that they replaced the back truck bed. So, my key unlocks everything, EXCEPT for my back truck bed (which kinda defeats the purpose of having everything lock together.)

Any ideas how one would get the back truck bed and cover to match up? Like I said, the cover matches the ignition (currently). I've love to have ignition, cover, and bed key to all match.
 
Call a locksmith & ask them that.
I've never heard of a lock being adjusted to fit a key, always the other way around.
But thats doesnt mean they cant. (no idea)
 
Info on cover cable replacement? Guess I shouldn't have been slamming the cover down all these years.
 
Thanks for the link Tombstones81. I'll give it a try next week. got a cable and 2 each of the Crimp Sleeve and Cable Clamp.

Item listPriceQtyTotal
Cable Crimp Sleeve - 3/32

Cable Crimp Sleeve - 3/32"
  • SKU: 56646
$0.952$1.90
Rotary Latch Cable Clamp

Rotary Latch Cable Clamp
  • SKU: 61249
$3.252$6.50
Rotary Latch Cable

Rotary Latch Cable
  • SKU: 99333
$9.951$9.95
 
Not so Fast.................

The lock/cable assembly for my OEM cover is a Lock with a sliding protected cable.

Order cancelled.

Doh....
 
Has anyone taken the lock cable assembly apart? Is it possible to replace just the cable?

Might be time to hit the Junk Yards....
 
Sorry it wasnt any help.
The one on my 05 ST doesnt have any cables that I can recall.
Just rods going from the middle to the sides that move with the handle.
 
Was my fault for not looking closely to the cable. They cancelled and refunded. No Problems. They are a good parts source. Thanks for the link.
 
I am now in this predicament. I have a bed cover that came with keys, but the keys don't work in the locks. I can't believe I didn't check that before I bought the truck.

I think I am now going to order those locks from the link in the first post. I heard that you can break the cylinder that the lock slide into if you're not extremely careful. Did you run into any issues like that?
 
I am now in this predicament. I have a bed cover that came with keys, but the keys don't work in the locks. I can't believe I didn't check that before I bought the truck.

I think I am now going to order those locks from the link in the first post. I heard that you can break the cylinder that the lock slide into if you're not extremely careful. Did you run into any issues like that?
Sometimes the keys need some gentle persuasion to turn in the lock cylinder. Mine are like that. I have to wiggle them around to get them to work. A little shot of powdered graphite into the lock cylinder can be helpful.

Craig R.
 
With love, neither the back tailgate lock, nor the top bed-cover lock are 'fort-knox' stile locks. They're more similar, especially the top bed-cover lock, as being more like the locks you get on 'locking gas-cap' covers. They're a deterrent, at best. The tailgate is a cut-key, like you'd use in a door. The bed cover is not (or doesn't seem to be - please correct me if I'm wrong, maybe age and being succeptible to incliment weather has made mine less than door-quality).

I'd not spend a great deal to get them all the same. I won't be toting anything in the back that that's long-term lock required. The locks will keep honest people honest, but you know how that goes. :)
 
Same key, they cover is pretty secure if you lock it and the tailgate.
 
Another thread weeks ago reminded me to look for a new lock for my cover. (05 ST)
As I did not get a key when I bought the truck.

Just tossed this one in & its a straight easy swap.
Quality keys as well (expected thin & cheap garbage)
Its actually the same quality as the oem truck keys!

https://truckoutfittersplus.com/are-tonneau-cover-lock-cylinder.html
In case anyone's been looking or forgetting to look.
I need to replace the lock on the rear of my factory tonneau cover. The vehicle is an '02 ST. I've attached a couple of pics of the lock assembly. Will the above referenced aftermarket lock cylinder work? My locksmith will key it to match my existing key.

Craig R.
 

Attachments

  • DSCN1384.jpg
    DSCN1384.jpg
    79.9 KB · Views: 66
  • DSCN1385.jpg
    DSCN1385.jpg
    108.4 KB · Views: 69
Last edited:
Sorry OnTrac, I didnt even notice the post & its from Nov :(
& I doubt it will.
Click on the link & the parts pic is accurate.
Which shows the lock assembly itself, doesnt match yours :(

Heres my covers lock assembly & the type of cover.
Which I should have initially included ><
 

Attachments

  • 269805957_10225854846979047_7384675923144969973_n.jpg
    269805957_10225854846979047_7384675923144969973_n.jpg
    89.6 KB · Views: 61
  • 269887316_10225854846659039_2630054559087518098_n.jpg
    269887316_10225854846659039_2630054559087518098_n.jpg
    83.2 KB · Views: 59
  • 267477841_10225854848139076_3434609934638002257_n.jpg
    267477841_10225854848139076_3434609934638002257_n.jpg
    99.1 KB · Views: 54
  • 269769558_10225854847419058_1226718454352039279_n.jpg
    269769558_10225854847419058_1226718454352039279_n.jpg
    57.6 KB · Views: 103
  • 147290639_10223725521587243_7184900729130005418_n.jpg
    147290639_10223725521587243_7184900729130005418_n.jpg
    110.3 KB · Views: 57
Sorry OnTrac, I didnt even notice the post & its from Nov :(
& I doubt it will.
Click on the link & the parts pic is accurate.
Which shows the lock assembly itself, doesnt match yours :(

Heres my covers lock assembly & the type of cover.
Which I should have initially included ><
No problem as I actually realized that is was a completely different lock assembly. Turns out the factory original lock cylinder for the early ST's is available again. Hooray!

Craig R.
 
Top