Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Fudged Undies" data-source="post: 543550" data-attributes="member: 57548"><p>I wouldn't go with ceramic pads (stonemeiser). I currently have them in my trac (morse-ceramics) and though it's not constant, at slower speeds they frequently have some squeaking. Moreover, they supposedly don't release heat well which adds to rotor warpage. If you are using drilled and slotted rotors, I suggest you talk to the manufacturer and see what they recommend using with those rotors. I would suspect, Carbon-Metallics will be your best bet. Produce a considerable amount of dust, but I had those prior to the ceramics and never had a squeak.</p></blockquote><p></p>