Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Scott Tanner" data-source="post: 984878" data-attributes="member: 58759"><p>both of my doors broke... that rivit is a royal PITA to get at.  You would have to disassemble the door to get at it, and the rivit has to be drilled out. The only issue on drilling is that the rivit has plastic on it which made it hard to drill. The plastic melts and coats the bit, rendering it useless.. I gave up and used a self tapping sheet metal screw. :angry:  The passenger side I has enough of the shaft sticking out, I crimped a nut on it to hold it... Keep your lock mechanisms lubed!!!</p></blockquote><p></p>