drop spindle

[Bob Carter]

does anyone know if there is a spindle made to drop a ST 2inches

 

[Ben Poche]

just loosen the torsion bolts

 

[Bob Carter]

I would but then it cost $200 for a front end alignment and I asked at the ford place about it and they had several different size camber washers and didn't know what size I needed but at $5 apiece it could get exspensive thats why the front end alignment is so much installing the camber washers

 

[Ben Poche]

that is high but still cheeper than spindles and you most likley need an alingment now any way.

 

[EddieS'04]

The trac doesnt use camber washers. The upper control arm bolts need eliptical washers on each end. They rotate and change the camber + or - ......

 

[Bob Carter]

thanks eddie