Fog light wiring PLEASE HELP

[Tony Favaloro]

I bought the Ford fog light kit for my 2001 ST and bezel and switch for fog lights. STUPID. The ford fog light kit's switch for the fog lights works differently than the switch that goes in the bezel. Can anybody help me wire this so I can use the switch in the bezel? Possibly from experience.

 

[Stephen Antonucci]

I want to do exactly the same thing, but have not found any help on this topic.



Steve

 

[Eric Pennal]

I'm not really sure what you're asking for, but I'll try to help.



Behind, and to the right of the radio, in the wire bundle feeding the rear window control knob, I have four wires connecting to my factory fog light switch. Looking at the back of the switch, left to right, the wire colors are:



Pins 1 & 2: not used

Pin 3: Blue/Black - to relay

Pin 4: Black - ground

Pin 5: Red/Black - instrument illumination

Pin 6: Tan/Orange - fog light hot



This is a picture of my fog light switch cluster. In this view the rear window control knob is the white harness on the right, my OEM fog light switch is the yellow harness in the middle, and the black one on the left is a second Ford fog light switch I added later. Of course, after the cluster is rotated into place, the switch order is top, middle, bottom - not right, middle, left. Please ignore all the wire taps.



<img src="http://www.zjstech.net/~library/3497/Fog%20Light%20Cluster.JPG">



Hope this helps.