Head Unit Install - Do I have all the right parts?

[Steve Golladay]

Howdy All - I finally sprung for the Pioneer AVIC F90BT with all the fixins. Wanted to make sure I had all the necessary pieces and parts to make it go in right the first time without the crazed trips to the local shop. Let me know if I'm missing anything...



Wiring harness - PAC C2R-FRD1

Double DIN fit kit - Metra 95-5812

Steering wheel control interface - PAC SW1-PS

HD Radio tuner - Pioneer GEX P10HD

Sirius Satellite Tuner & Bus Interface - SCC1 & CD-SB10



Also chipped in for a wireless licence plate frame backup camera. It was a $50 ebay special so if it sucks I'll just ditch it.



Does this cover it? Please let me know if there's ANYTHING at all I may be missing before I toss this baby in.



Thanks in advance!



Steve



P.S...Its for an 09 Adrenalin

 

[Mark Stadnicki]

looks like you got it all. I don't know how the wireless camera will hook into it though. Make sure you do the hard bypass mod for the parking brake wire. That way you can adjust the NAV while in motion. The mod will also let you watch video in in motion too, not that I would condone that



You can use your factory sat antenna if you have one on the Sirius tuner. Just need to take the plastic off the end of it (it just clips on). I used the factory satellite plate in the right kick panel to mount my Sirius and bus interface. The NAV sat antenna will be fine under the dash. I installed mine on the roof prior to finding that out...



Also, I suggest soldering and shrink tubing the harness connections and making it all as short as you can. There in NO room behind the unit once installed.



Let me know if you need any more info- I installed the same set-up in my '07 a few months ago.

 

[Steve Golladay]

Throw me a bone on the "hard" bypass. I've only seen mention of the software bypass.



Glad you hit on one of my questions...using the factory installed Sirius antenna. Planning on making the install as clean as possible so any tips and tricks are appreciated.



I'm at [email protected]. Drop me a line so I can give you a shout if necessary.



THANKS!



Steve

 

[Mark Stadnicki]

emailed ya... Oh, regarding the harness... if there is a interface box on the harness wires, leave them long so you can tuck them down the sides- I hope I caught you soon enough.