Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="1RADCJ5" data-source="post: 1038342" data-attributes="member: 74908"><p>Thanks swshawaii -I also went on a hunt for the bolts for positions "B" and "C". I had the sleeves with me, and the new prothane bushings. I went to Ace Hardware, and the had the grade 10 12M-1.75 for those positions in 2.5 inches, but not ~3"(72mm). I looked at the threads in the inner(bottom) sleeve, and there is maybe 3/8" thread inside, at the top, meaning all the extra bolt that goes further, like the 1" that goes past the sleeve, and out the bottom is useless thread. Maybe this can help someone. Mike</p></blockquote><p></p>