Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="user 62851" data-source="post: 1026724" data-attributes="member: 62851">So I think I found a set of rims that I like. I read online that the factory wheels are 16x7 with a hub bore of 70.3 and an offset of +12mm. The wheels I like are 20x9 with hub bore of 78 and an offset of -12mm. I used the link below to match things up and it looks like it will work. As for tires, my factory rims are on 265/75r16 and am going to upgrade to 35/12.50/20. The link doesn't use 35 tire size but the equal size of 35/12.50/20 is 318/68/20. I used 315/70/20 as my measurement and it looks like it will fit fine, except hang out past the fender by 1.9".With the factory hub bore at 70.3 and the aftermarket wheel hub bore at 78, would that still work out? or does it have to be exactly the same or closer to?</blockquote>