Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Raul Avila" data-source="post: 538784" data-attributes="member: 58248"><p>Tim, I made a modification and posted it here a while back ago that has been working good for me. I cut one of the cooling line and installed a tee fitting with a ball valve. When I want to change my fluid I open the valve with the engine running & let it drain into a container, then top off the fluid. I usually do only 3qts every 5000 miles but if you wanted to you could keep flushing & adding as much as you want. At idle speed it takes about 1 minuit to do 2 quarts so it is easy to keep up with adding fluid. I also placed a screw on cap over the opening as a safety in case for what ever reason the ball valve should move. Good luck</p></blockquote><p></p>