Moog K8695T Lower Ball Joint Replacement Boots

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

swshawaii

Moderator
Staff member
1st Gen Owner
V6 Engine
2 wheel drive
Joined
Feb 27, 2009
Messages
5,634
Reaction score
514
Location
Kailua-Oahu, Hawaii
What engine do you have?
V6 engine
What year is your Sport Trac?
2005
What Generation is your Sport Trac?
1st Gen Owner
Posted this last year on EF. Many have replaced their lower ball joints with the ever so popular Moog K8695T "Problem Solver" ball joints. Moog has never offered rubber dust boots separately, and there is no direct aftermarket replacement. Providing they are properly greased, Moog ball joints are known to far outlast the rubber dust boots that are prone to dry rot regardless of environment. Moog usually will NOT honor the lifetime warranty because of boot failure. It became such a big problem that Moog redesigned the K8695T that has no external or outer boot, After much trial and error I tried the Energy Suspension 9.13130 universal polyurethane boots available in black or red. Also found an effective way of separating the ball joint stud from the tapered hole in the knuckle/spindle with the use of a floor jack and castle nut socket. I'll post if anyone's interested.
https://www.explorerforum.com/forums/threads/moog-quality.493538/post-3893074https://www.energysuspensionparts.com/9.13130
 
Last edited:
Top