Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="mcarroll02" data-source="post: 1054400" data-attributes="member: 77994"><p>All vacuum leaks were repaired. I replaced the intake gaskets, valve cover gaskets, pcv valve and elbow, dpfe sensor and hoses, as well as whatever the big vacuum line tha comes off the intake and connects to something under the battery, i believe that goes back to the charcoal canister. All that was replaced about 2 years ago. Yes i can reset and clear any codes with my scan tool. I already did that the last time it acted up. As far as i know injectors are factory. I have a can of seafoam in the tank atm. Usually run it or lucas fuel injector cleaner about once or twice a year. I dont have a fuel pressure gauge to check that atm, but i replaced  pump and filter, which was also the next to last oil change so maybe about 8k ago believe it was last year. Throttle body is clean, usually remove and clean it once or twice per year. I only put about 50-60 miles per week on the truck...benefit of only living 2.5 miles from work.</p></blockquote><p></p>