Need Help Wiring Driver Door

[user 66225]

How do you run speaker wire through the front doors? The pass. door looks a little bit more feasible than the drivers door. I've got the back doors done, but the fronts look painful



Thanks

 

[Jacob Dryer]

I didn't just use the stock wiring it will handle 100+ watts with no issues..

 

[user 66225]

Got the pass. door, but now I've got a different problem for the driver. Looks like too much of a pain in the @$$ for the driver door, so does anyone have a "map" of where the speaker wires for the driver door lead to in the cab? Or, a good place to find them, so that I can just cut it from there, and route it to the amp.



Thanks

 

[user 66225]

bump

 

[user 66225]

bump.

 

[Steve McKellop]

Not trying to be smart, maybe I don't understand what you're asking, They lead to the connector for the stock head unit.... You need a connector diagram for that?

 

[user 66225]

Knew that , guess I meant to ask, do they go anywhere else on the way, ie. near driver kickpanel, floorboard, etc. I would have preferred to "intercept them" before the headunit

 

[Steve McKellop]

I haven't torn into the kick panels on my ST yet but I'm sure they're in the kick panel behind the parking brake lever ......... at least everything else I know of is that way.



edit: Actually I do have the kick panel off but you the wiring is behind an insulator panel. I can get a photo of what's behind the insulator if you give me a day or so.

 

[TRACket Paul]

The + wire is orange/light green stripe. The - wire is light blue/white stripe.



The path is from the radio to a large gray square connector (60+ wires), located behind the dash around the steering column. From there, to behind the kick panel into the large black round connector between the door frame and the door. And than into the door.

 

[user 66225]

Thanks, I ended up just doing it behind the headunit