Need measurements for dual 10" speaker box sound system!!!

[Rebecca Hernandez]

I would like to know if anyone has the measurements for a dual 10" speaker box to be mounted behind the rear seats. Also I need some advice on how to mount it. All comments will be much appreciated!!!



my email is [email protected]

 

[Don Edwards]

Have you checked out the projects section under the members area.



here are a couple of different projects



http://www.mysporttrac.com/shared/projects.asp?VIEW=163&WRENCHES=4&PageHeader=Member%20Projects



http://www.mysporttrac.com/mysporttrac/projects/FactorySub/Factory-Sub-Project.htm



http://www.mysporttrac.com/mysporttrac/projects/Dual8/Dual8.htm



hope that helps, Hell I hope that works





Don Monkeyboy

 

[Jacob Dryer]

[Broken External Image]:



Those are the dimentions for my box. And it is 36" long so that it fits without any special construction to get around the rear window motor. So it sits offset on the drivers side.

 

[Sed Thompson]

Hey JD,

How much air space does that give you from the speaker to the back of the seats?

 

[Jacob Dryer]

None basicly.



[Broken External Image]:



The subs have a grill ring though to allow them to still move without hitting the seats.

 

[Jake Levin]

JD, are you using shallow mount subs?

 

[Jacob Dryer]

No they are just cheap Rockford Fosgate P1's. 4 15/16" mounting depth if you take the magent cover off.

 

[Jake Levin]

I bought a set of earthquake 10" shallow mounts . the mounting depth is only 2 11/16". I'm building a custom box similar to yours but I don't want the subs to be offset to the driver's side. Do you think that's possible? Another crazy though I had was I want to dynamat the back wall of the truck and instead of putting a back on the box, seal the box to the back wall of the truck and use that as the back. What do you think?

 

[Jacob Dryer]

I don't think you could get away without offsetting them. The window motor sticks out pretty far, but it might be possible.



I asked about sealing a box to the backwall also and was told by many who know way more about car audio than I do that it was a bad idea. The reason being that the body will actually flex decreasing the output. I never tried though to prove them right or wrong.

 

[Rebecca Hernandez]

JDBoxes...do you have the dimensions for the area on the box..on the back side...right on top of the 19"? Is that area built to fit it around the rear window motor? How much does a box like this one you posted costs?