TT & Shackle lift

[Chris Rice]

I read the project for this and want to do it on my truck. I just wanted to make sure that it is the same for a 4x4 as the project was for a 4x2. The project I read was "Nates Lift" thanks!

 

[Brandon Hovater]

I did it on my 4x4. I got about 1" and 3/4 lift. Just do the twist and rid around just a few miles and get the front end aligned.

 

[Chris Rice]

Great thanks, Im going to do it this weekend I think, just wanted to be sure.

 

[WXMotorSports DecalsPartsAccs]

Don't forget the alignment too.

 

[Jason Dyer]

Has anybody tried the 2-3" torsion key lift by truxxx.com and if you have how much lift did you get?

 

[Becker69 CO]

Cottonwood; just FYI; make some careful measurements from a stationary point (i.e., tow hooks or something similar) on level ground before and after so that you can guage how much you actually went up per side. Don't go much over 1.5" if that high as you'll stress the CV angle. Know ahead of time that it'll be a hell of alot stiffer, which might influence future front shock aquisitions to suit your comfort needs. Have fun with it and you should be very pleased when done. GET AN IMMEDIATE ALIGNMENT... to save your tire wear!