Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Bill Ellis" data-source="post: 540841" data-attributes="member: 59929"><p>You don't need to remove the radio from the bezel. Take out the two screws and gently pry the bezel loose at the sides and it all slides out. The bezel is held in place with a clip on each side. You have to remove it to really check the wiring. In fact, I was able to pry mine loose just using my fingers.</p></blockquote><p></p>