Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Pat in RI" data-source="post: 1052914" data-attributes="member: 78596"><p>I've done a few things in the past week. I fixed my inflatable lumbar supports by lubing up the seal on the bottom of both toggle switches. I jumped the AC compressor relay and added a pro stop leak and then 2 and 1/2 12 oz cans of refrigerant. The AC is ice cold. I had to jump out the compressor because there was no pressure in the system so the clutch would not engage. After the 10oz of stop leak and a half can of 134 the clutch began to run and a added enough to top it off a about 40 psig. I'll see if it leaks down over the next week or so. Lastly, I remade 2 ground straps from the cab to frame. I used 10ga and dielectric grease. Here are a few pics.</p></blockquote><p></p>