Windshield Washer Spray

Help Support SportTrac.org:

Wes Davis

Well-Known Member
1st Gen Owner
V6 Engine
Joined
Jul 24, 2005
Messages
1,579
Reaction score
0
Location
Deerfield Beach, FL
I need to clean and/or replace the hoses and plastic t fittings that run from the reservoir to the sprayers. Anyone give me some instructions? Looks pretty straightforward except for the passenger side. Looks like you have to get under the black vent cover that the wiper is mounted to. How do I get this cover off?







/
 

swshawaii

Well-Known Member
1st Gen Owner
V6 Engine
2 Wheel Drive
Joined
Feb 27, 2009
Messages
5,211
Reaction score
150
Location
Kailua-Oahu, Hawaii
The hoses are very tight and the plastic fittings can break easily.

Also be careful around the metal clips, they are very sharp. GL
 
Last edited by a moderator:

Wes Davis

Well-Known Member
1st Gen Owner
V6 Engine
Joined
Jul 24, 2005
Messages
1,579
Reaction score
0
Location
Deerfield Beach, FL
Yeh my plastic fittings have broken up. That is what is clogging the hoses and sprayer. I tried a small wire down the sprayer, used a compressor to blow air in the hoses etc etc. The driver side is clear but I cant get the passenger side. I purchased new correct size fittings but they fit too loose because the hoses are stretched out from the old fittings and age.





/
 

Adam Smith

Active Member
1st Gen Owner
V6 Engine
Joined
Oct 2, 2003
Messages
125
Reaction score
3
Location
San Diego, CA
I went to a pet store and bought a bunch of t fittings for fish tanks for about a dollar. Home Depot also has some fittings for drip irrigation.
 

Latest posts

Top