Search results

They sell Lift struts that are not the best. I would not go over 2-2.5 MAX and if you do you may need new upper arms for alignments. so 2" or your in deep. They sell strut spacers, TRUXX makes nice ones.

Or maybe go with a small lift strut, I know it will raise the rear when not towing, but will sit flat when loaded, or the BEST is the new spring for the extra weight. Air bags I dont think are made for these.

They are either gonna love ya or hate you after this...lol

I think i answered this on Facebook ??? Behind kick panel.

Cool deal, Enjoy it.

OHM, the fuel injector, wires ?? within 20K mile. Check plug to see if its cracked.

Fuel filter? Air filter? Dirty MAF? Bad IAC motor? When you did the intake did you do the injector seals ?? Ignition coil? Check the PCV elbow UNDER the throttle body pass side, it cracks on the bottom and you can see it unless you take it off.

THIS !

Mines been good for 2+ years. The ONLY thing with the cheap shafts is the carrier bearing mount may not come with the studs in it. You may have to add bolts and nuts, OR i was able to cut the weld and hammer out the stud and swap it over to the dorman one. Easy,

Probably bad 4wd module passenger side kick panel.

All the ones I've changed I've just lightly primed and installed with new washers. Never set to TDC.

The knock off elms are junk

I believe that's the speed sensor location that was moved. As for wiring you need the OEM repair manuals for that.

Welcome, Its slow here but good info. Best to buy the official FORD wiring manuals for the 2002.

Your emails were 6 hour apart on a forum that's dead as a door nail. I have one in the blue truck, Been there for about 2 years.

Absolutely it can, they can clog, get dirt in them and other things. That was 1 sign in the early days it fell apart..

Just ziptie the hoses to the elbow and ziptie it up. The oem parts are no where to be found other than a good junk yard. Its a vent elbow. There was a TSB back in the day from ford about this coming apart and all the fix was zipties.

Welcome, Its slow here but good knowledge, If you have Facebook, Check out the FB forums too.

This post is from 2008 !!!!!! All that info is lost and gone by now.

Yep, vent hose, Goes from top of filler neck to the vent canister between the body and bed.