cp13
Member
- Joined
- Aug 24, 2024
- Messages
- 3
- Reaction score
- 1
- Location
- Hattiesburg, MS
- What engine do you have?
- V6 engine
- What year is your Sport Trac?
- 2001
- What Generation is your Sport Trac?
- 1st Gen Owner
So recently I purchased 2 sport tracs bad trans great engines both are 2001 however 1 is a job 1(trans didn't even shift into any gear does nothing no sound or rpm change) and the other is a job 2(trans shifted into gears but was slipping a good bit). They came with 1 good spare transmission which I already installed in the job 2 and its now running and driving great! The transmission that I pulled from the job 2 I pulled apart and replaced the sprag (it was cracked but not broken), the overdrive planetary was locked up so I replaced it, everything else looked good but I replaced all seals and clutches, bearings, etc it's ready for install. The transmission in the job 1 was swapped with a rebuilt transmission not the original and is the same as the job 2 transmission. I have read a LOT of mixed information and some are saying it's a direct swap and some say it won't work. If someone can please share the transmission wiring harness for each truck pic or pdf and any information on the sensors that aren't used. I don't know if this wiring harness is the original in the job 1. It's definitely not the same as the job 2 there is a sensor plug missing on the harness on the job 1 for the sensor above the neutral safety switch. Just trying to verify this is even the right harness or if it matters. I have a TON of pics of everything so if needed I can show everything