Search results

It will be one of these 3... https://therangerstation.com/tech_library/pdf_documents/2004_Ranger_Radio_Wiring_WithoutAudiophile.pdf https://therangerstation.com/tech_library/pdf_documents/2004_Ranger_Premium_Radio_Wiring.pdf...

Checking the grounds... Did you physically disconnect them and inspect for corrosion on the matting surface and inspect the ends of the cables for corrosion underneath the insulation?

The 2 large ports for vacuum on the intake are on the driver side. The 3rd is on top at the back which is for the vacuum booster.

Welcome to the site.

https://sporttrac.org/threads/swap-interior-parts.124328/

I never really thought about if mine went all the way down without holding the switch. Up/Down are momentary switches on mine. Knowing this I guess I just thought that like any PW switch you had to hold the position to get it up or down all the way, otherwise, it would just stop where I let it go.

Ok, so everything is all back together and running smooth. No CEL anymore. That always feels good. I ordered new coolant sensors, come to find out the sensor PCM is different from the actual coolant sensor. I just swapped the o-ring from one of the new sensors to the original PCM sensor...

As mentioned above, painters tape (1") works wonders when trying to find where air disturbances are. Windshield gasket, then door gaps, windows, sunroof, luggage rack, etc. are all culprits. Start with the area that you think the noise is coming from.

Welcome to the site.

Welcome to the site.

Welcome to the site.

Welcome to the site.

Got to work on the ST again today. The plan was (that's never a good start, LOL) to replace the #3 injector. While I was at it I was going to install the t-stat housing and do both tensioners. I used the link below as a guide, pretty decent step-by-step. Everything was going well until I...

Welcome to the site.

Agree, Ford should bring back the ST.

So, I had a little of "me time" and worked on the ST. I decided to start something quick and easy, so I started the tailgate handle swap. Total time approximately 30-45 minutes. Before: Pulled the inside cover, (6) T30 screws and (4) plastic push clips. This gives access to the handle...

Well, that was a total fiasco replacing the driver side front window glass. 1st hour was spent vacuuming broken glass out of the door, interior, and ground. Pulled the run channel to clean out all the broken glass from it. Didn't realize the lower slide piece needed to stay so I popped it off...

Welcome to the site. What year ST and a picture too please... Otherwise it's a lie.

So, after the week of working away from home I get home and installed the Ford plug wires. Definitely made a difference and noticeable click when pushing onto the plugs. I definitely have more performance but the I still have the P0303 misfire. So, I guess I'm ordering a new injector. Should I...

Sharp looking ST.