2002 drivers door striker plate bushing

shop deals on amazon
Advertise with us
Shop deals on ebay
Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
E

Ed Fenwick

Well-Known Member
Joined
Dec 28, 2008
Messages
1,028
Reaction score
70
Location
Kea'au, HI
What engine do you have?
V6 engine
What year is your Sport Trac?
2002
What Generation is your Sport Trac?
1st Gen Owner
Aloha, the bushing on the driver's door striker plate broke. NAPA gave me one that lasted one day! However, they said that it was for an Explorer. I can't find the bushings, everyplace will sell the only whole striker plate. How do I find out if what I buy is made in China or not?
God bless Ed
 
Ed, I have been making mine from teflon tubing. I cut it to length. Then I cut it open at an angle, and roll it onto the steel post. Lasted several years so far.
 
Replaced the ones on my '02 with 1/2" Plex tubing. I marked the location of the striker(s) then removed them. Disassembled the bolt from the striker and removed the old bushing. Installed the "new" bushing and reinstalled everything.

I "think" I had to removed (sand down) the diameter of the tubing just a bit so that the latch would close on the new bushing (tubing).

Have several years of use on them so far.
 
Thanks guys, I just bought a piece of PVC pipe. I'll try that first.
Any ideas on how to find out if a product is made in China?
Thanks God bless Ed
 

Latest posts

Top