Ball Joints?

Greg Lovell · Nov 28, 2011

Hello, I want to replace my lower ball joints with a set of MOOG ones but don't know what model I need? rockauto and amazon are showing multiple models for my ST. I have a 2004 XLT Flex ST does any one know what model that would take? Also is it a good idea to replace the upper ball joints too? I have 103000 miles on my ST and am sure it has the originals on it. Any help would be great.

Thanks:driving:

swshawaii · Nov 28, 2011

Greg Lovell · Nov 28, 2011

Do I need the standard or oversized one?

swshawaii · Nov 28, 2011

Unless you've had LCA damage, and they are originals, use the standard K8695T. GL

Greg Lovell · Nov 28, 2011

Thank you, should I do the uppers also?

swshawaii · Nov 29, 2011

Lift each tire off the ground by the lower control arm and inspect for play.

EDIT- Sorry for the bad link. Copy, paste and search:

FRONT SUSPENSION BALLJOINT INSPECTION JOB AID

Rodney Leary · Dec 2, 2011

I replaced with MOOG when I did mine last summer. The first standard set just slid in, didn't need to be pressed. So I slid them back out and exchanged for the oversized. Which fit much better.