bed extender

[Andrew Tollison 3]

Got my bed extender yesterday and I think a part is missing, what all is needed to insatll in? and which holes do the pins go in? I have a 04 and the bed extender came out of an 03.

 

[Kevin Palmer]

The cage itself which has the locking pins as part of the cage. And two pivot pins. That is all there is to it.



As far as the holes go, set your cage in the bed. You will see that the pivot slots on the cage line up with two unthreaded holes. These are the hole you will run the self tapping bolts into. They take a number 50 torx bit.

 

[Andrew Tollison 3]

Coastiejoe, thanks. I'll try that when I get off work today.