Tony Tassillo
Well-Known Member
i am trying to add the factory steering wheel controls to my 07 TRAC. well i got the plastic panel with all the controls on it. pulled the air bag only to find out that the harness is not there and i needed it to be , there is one main harness comming from the clock spring looks to be about 10-12 pins and only like 4 or 5 of them are wired, which of course goes to the cruise control. calling the ford parts department is of no help they cant seem to help me. if any one with an 07 and can do me the biggest favor that would be great. all i need is for you to disconnect your battery, remove the two - 7mm bolts that hold the airbag and front fascia on and take a few pics of the harness you have and the harness at the steering wheel audio plug itself. the blots are located at 3 and 6 oclock on the side of the steering wheel. that way i can pin this harness and solder the wires at the controls. then add the converter made by PAC or Peripheral and finish up my steering wheel controls on my alpine. also if the harness has a sticker on it and it has a part number that would help also.
TRAC MUST HAVE FACTORY AUDIO CONTROLS ON THE STEERING WHEEL TO BE OF ANY HELP!!!! THANKS.
TRAC MUST HAVE FACTORY AUDIO CONTROLS ON THE STEERING WHEEL TO BE OF ANY HELP!!!! THANKS.
Last edited by a moderator:
