Need some measurements from anyone whos awake :)

[Brock Lagunas]

I was wondering if theres anyone awake right now that has a stock trac that would do me the biggest favor of measureing from the ground to the bottem of the frame... dead center of the truck front to back

 

[EddieS'04]

Frame rails or cross members??

 

[Brock Lagunas]

frame rails please... just one will do. im trying to figure out how much lift im going to end up with

 

[FlipTrac_511]

I measured 13" from rail to level ground (from B-pillar center line). I have a 04 with 255/70/R16s.

 

[EddieS'04]

Brock, Sorry about not getting back to you. After I posted my connection went down. I got the same as trac_511. Plus or minus 1/4" or 1/8". Depended on which side and place of measurement. I have 265/60-18".

 

[Brock Lagunas]

My trac had 235s stock... would that make much difference? Im at 45" to the bottem of the frame rail



Thanks for yalls help!!

 

[Yardsale]

Tire diameter difference will translate to a difference in the measurement you want by 1/2 the difference of the diameters. So, a 18" measurement with a 30" tire would be 20" with a tire of 34".



45"? That's some serious lift!