2007 ST
I installed the Power tailgate I got off of eBay, it is basically the Dyno Lock Power Tailgate Lock.
I didnt like the way they were installing it. Instead of moving the lock mechanism from the locked to unlocked position it was pushing a pin out to stop the tailgate handle from pulling out and releasing the tailgate. I installed it my own way at a different position. I didnt use their bracket and I made (bent) my own piece to move the lock mechanism from locked to unlocked. I am happy they way it came out.
The main reason for this post is to tell anyone else who is installing this about the wires. The other project is from a 2004 ST and the colors are different. Also I called the phone nuber the instructions and talked to a very nice guy named Jim at Dyno Lock who told me what color wires to use. He said to use the pink and something & the red/black wires. Those wires were NOT anywhere in the entire harness. There were no pink wires at all and no red wires either, although there were a few wires with a red stripe but none that were red/black.
I found the wires in the B Pillar on the plug for the drivers side back door. It is a 14 pin plug that has 9 wires in it. The wires needed were:
Pin # 6: Grey / Black Stripe
&
Pin # 13: Purple / Grey Stripe.
I will also post this to another thread for people who may do a search for this info.