Question on painting the radio bezel...

[trickblue]

Do you just mask off the rear power window switch identifier or do you take it out...



Also, does anyone have any experience with the Krylon Fusion spray paint?



TIA...



tb

 

[JK II]

Your better off removing the bezel. Its just a couple bolts underneath it and unplug everything. The power window switch is screwed in I believe.

 

[trickblue]

I removed the bezel already and took out the switches and cigarette lighter but the indicator for the rear power window is melted in from the back from the factory...

 

[Woppy V]

take the sucker out. tape off the areas where lights go. sand with semi corse grit then a fine grit.. use a adeshion promoter... then many coats of paint.. my library has pics of the end result.

 

[trickblue]

So do you glue it back in after you paint?

 

[Ron N]

I taped off the area you are talking about. Removed the switches, sanded and primed with bullldog adhesion promotor and painted._Ron

 

[Larry Phillips]

I just took them out, and snapped them back in when I was done.

 

[Victor V01]

I taped mine off.[



img]http://www.zjstech.net/~library/13077/DASH DRIVERS ANGLE.JPG

 

[Paul H]

Hey trick i sent you an email...

Paul H