1.Set parking brake.
2.Place vehicle in park (auto) or Neutral (manual).
3.Ignition key is in OFF position.
4.Close all doors.
5.Unbuckle driver's safety belt.
6.Park lamps/headlights are in the OFF position.
Deactivation procedure:
1.Turn the ignition switch to the Run position (DO NOT START ENGINE).
2.Wait appx 1-2 min until the safety belt warning light turns off.
Steps 3-5 must be completed within 1 min or the procedure must be repeated.
3.Buckle and unbuckle the safety belt 3 times, ending with the safety belt unbuckled.
4.Turn the headlamps ON then OFF.
5.Buckle and unbuckle the safety belt 3 more times, ending with the safety belt unbuckled. The warning light will illuminate for 3 seconds.
6.Within 7 seconds of the safety belt light turning off, buckle then unbuckle the safety belt. Belt Reminder Chime is disabled/enabled.
The safety belt warning light will flash for 3 seconds to confirm that Belt Reminder is disabled.
Reactivation procedure:
To reactivate the Belt Reminder Chime, follow the same procedure for deactivation. When you have completed the procedure, the safety belt warning light will flash for 3 seconds, turn off for 3 seconds, and flash again for 3 seconds to confirm that the Belt Reminder Chime os enabled.