Steve Krusich
Well-Known Member
:soap:I made my own Cold Air Intake from a parts list and instructions from Todd Z. It cost me about $65 total not including the K&N air filter for my factory airbox. It was easy to construct. Here is the list:
12" 3.5" Chrome Pipe
3.5" 90 degree rubber elbow
3.5" Silicone straight Sleeve
3.5" Worm Gear Hose Clamps (Qty4)
5/16" Rubber grommet
5/16" Tee for Air Hose
12" 5/16" vacuum Hose
22" 5/16" vacuum Hose
I have an extra 20" of 3.5" chrome pipe which is more than enough since you will need only 12" of the chrome pipe.
$25 shipped in the continental US.
Please email me at: [email protected]
12" 3.5" Chrome Pipe
3.5" 90 degree rubber elbow
3.5" Silicone straight Sleeve
3.5" Worm Gear Hose Clamps (Qty4)
5/16" Rubber grommet
5/16" Tee for Air Hose
12" 5/16" vacuum Hose
22" 5/16" vacuum Hose
I have an extra 20" of 3.5" chrome pipe which is more than enough since you will need only 12" of the chrome pipe.
$25 shipped in the continental US.
Please email me at: [email protected]
Last edited by a moderator: