Tonneau Cover parts

[Peter Braga]

My buddy, recently gave me his Tonneau cover. Unfortunately, it was missing some parts Does anyone now where I can find specific parts, I have the exploded diagram, but when I try to pull the parts from Ford.com it doesn't come up. All I need is the bolts that hold the part where the actual cover locks into. Its the piece that attaches to the side of the truck be

 

[yankeegator]

If you're talking about the bolts that hold the 4 brackets at the corners of the bed, the part # is -W707426-S900 (takes 12; 3 on each bracket)

 

[Richard L]

peterb77,

We need a little more info or perhaps post a photo, but I will tell you as much as I can.



If you talking about the bolts that hold the latch striker brackets to the 4 corners of the pickup bed, they are 6mm, 1.25 thread and about 25mm long. You only need 2 per bracket for a total of 8 bolts.



If you are talking about the bolts that hold the spring loaded center pivot pin bracket to the center hinge, I beleive they are also 6mm 1.25 thread, and about 15mm long.



In all cases, you do not need to use the Torx-head (star) bolts. you can use hex head or even phillips head. All of the bolts are available at most hardware stores or many autoparts stores like Pep-Boys. If you want to continue the black look, just paint the bolt heads.



...Rich

 

[Peter Braga]

Thanks...That's exactly what I was looking for,