Rust removal from frame, Protecting and other work. (Rear half)

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Todd Z

Well-Known Member
4 wheel drive
2nd Gen owner
V8 Engine
Joined
Sep 21, 2003
Messages
22,489
Reaction score
814
Location
Long Island, NY
What engine do you have?
V8 engine
What year is your Sport Trac?
2010
What Generation is your Sport Trac?
2n Gen Owner
Well over the last weekend I removed Blues bed and took care of all the rust back there. Thanks to a crap design, NY road salt they get beat up, YES, even with frame protection it still failed. The ST adren design without mudflaps allows the water to be thrown up on the frame. I found mud flaps that fit last year but the damage was done. Glad i caught it now.
PS the front half looks great, Not new but dam good. lol
Can upload only 20 photos so, here is half of them. You get the point.
Used Needle guns, Sanding, grinding, and POR-15 products to complete.
Enjoy the pics !!!
Todd Z
 

Attachments

  • IMG_6310.JPG
    IMG_6310.JPG
    2.5 MB
  • IMG_6348.JPG
    IMG_6348.JPG
    2.3 MB
  • IMG_6347.JPG
    IMG_6347.JPG
    2.2 MB
  • IMG_6345.JPG
    IMG_6345.JPG
    2.9 MB
  • IMG_6328.JPG
    IMG_6328.JPG
    3.8 MB
  • IMG_6320.JPG
    IMG_6320.JPG
    2.2 MB
  • IMG_6318.JPG
    IMG_6318.JPG
    2.2 MB
  • IMG_6317.JPG
    IMG_6317.JPG
    2.2 MB
  • IMG_6314.JPG
    IMG_6314.JPG
    2.4 MB
  • IMG_6312.JPG
    IMG_6312.JPG
    2.3 MB
  • IMG_6279.JPG
    IMG_6279.JPG
    2.2 MB
  • IMG_6309.JPG
    IMG_6309.JPG
    2.7 MB
  • IMG_6300.JPG
    IMG_6300.JPG
    1.9 MB
  • IMG_6297.JPG
    IMG_6297.JPG
    2.3 MB
  • IMG_6295.JPG
    IMG_6295.JPG
    2.3 MB
  • IMG_6291.JPG
    IMG_6291.JPG
    1.9 MB
  • IMG_6290.JPG
    IMG_6290.JPG
    2.2 MB
  • IMG_6285.JPG
    IMG_6285.JPG
    2.1 MB
  • IMG_6284.JPG
    IMG_6284.JPG
    2.2 MB
  • IMG_6281.JPG
    IMG_6281.JPG
    2.4 MB
Looks much better. Never been more glad that i live in Carolina :)
 
Nice. I live in Ohio & should probably do this.
How difficult is bed removal? Couple bolts?
 
Great job done. Mine didn't come out nearly as good but it is a New England truck. Lots of salt used on the roads. My truck frame had lots more rust and cankers than yours. Hopefully, it will hold up for a long time.
 
Hey Todd
It came out great. Considering you live on the island of long, it really doesn't look like it was too bad. Lived there for many years and as you know, rust comes with the territory. Now if you would take the vehicle out of the garage and put some miles on it, the rust would have been worse. I mean with only 18,000 miles and a garage , I say it in pretty good shape. Lol
 
Very nice work!
You just showed me what I have to do to mine.

Por15 is good stuff!
I've used it too.
What quantity was required to do your frame?
Did you apply a finish coat?
 
Last edited:
Hey Todd
It came out great. Considering you live on the island of long, it really doesn't look like it was too bad. Lived there for many years and as you know, rust comes with the territory. Now if you would take the vehicle out of the garage and put some miles on it, the rust would have been worse. I mean with only 18,000 miles and a garage , I say it in pretty good shape. Lol

173 thousand miles, daily driven and parked outside..... :) lol
 
Very nice work!
You just showed me what I have to do to mine.

Por15 is good stuff!
I've used it too.
What quantity was required to do your frame?
Did you apply a finish coat?

Bottom was flat, top was gloss ( Salt and chemical resistant thy sell now)
 
Great job done. Mine didn't come out nearly as good but it is a New England truck. Lots of salt used on the roads. My truck frame had lots more rust and cankers than yours. Hopefully, it will hold up for a long time.
Long Island... I know salt...hehehe
 
Nice. I live in Ohio & should probably do this.
How difficult is bed removal? Couple bolts?
A few bolts and some trim, I removed the bumper first clean everything. Gas filler, 3 people to lift it, and if its rusty, get out the torch or grinder. My front bed plate spun, cracked the fiberglass, Had to repair that too.
 
wow..you certainly arent afraid of work. great pics...now i see whats under that box.
that exhaust pipe is weird.
 
wow..you certainly arent afraid of work. great pics...now i see whats under that box.
that exhaust pipe is weird.
It’s aftermarket by a shop here.
 
Top