kevinbakon
Well-Known Member
If I have been informed correctly, 1, 2 & 3 pictured below are controls for 4x4. (I obviously don't own a 4x4)
What are 4, 5, 6 & 7 for?
[Broken External Image]:
Also, I removed 5, 6 & 7 and the wiring simply snaps into the pack of the dummy plate.
Can I safely use these wires (since they seem to be hot but not utilized) for a 12v accessory line?
The best that I can tell, the black/white wire is a ground and the green/red (same row, two wires over) is a constant with 11.08v to 13.48v current.
Can anyone confirm this & advise?
Thanks
What are 4, 5, 6 & 7 for?
[Broken External Image]:
Also, I removed 5, 6 & 7 and the wiring simply snaps into the pack of the dummy plate.
Can I safely use these wires (since they seem to be hot but not utilized) for a 12v accessory line?
The best that I can tell, the black/white wire is a ground and the green/red (same row, two wires over) is a constant with 11.08v to 13.48v current.
Can anyone confirm this & advise?
Thanks
Last edited by a moderator: