kevinbakon
Well-Known Member
Hey all, a little advise if you don't mind . . .
I FINALLY wore out my factory installed 255/50R-20 Pirelli Scorpion STR tires . . . Those tires were a nightmare from the beginning (road noise, bad vibrations, etc.).
Last April, I replaced them with a little wider and better rated tire,
265/50R-20 XL 111V B Yokohama Prada Spec X tires
The salesman recommended the wider tire for better wear, as my Pirelli tires were wearing on the inside a little unevenly, on all four.
Less than a year later (over the last couple of months) I've noticed dramatic wear on the outside shoulder of all four of the Yokohamas . . . My immediate thought was that it was either due to the alignment, faulty tires, aggressive turning, or all of the above . . . Admittedly I drive a little aggressive, but I can't imagine that being the primary culprit . . . Regarding the alignment, I've actually had 4 in the last year and a half, with no major adjustments, major part failures, etc. . . .
The salesman denied that it was the tires, but worked with me on a price for replacement . . . We agreed on a price & he encouraged me to go even bigger on the tires to prevent this from reoccurring. He explained that the tires would have more rubber around the rim's edges, etc . . . the problem is though that he went too big and they now rub. They are
275/55R-20 XL 117V B Yokohama Prada Spec X tires
Considering I have little to know tire buying experience (mainly because I've never needed any) I have to rely on the "experts" weather they are knowledgeable or not. The salesmen have ill-advised me twice now, so my thought is that since the manufacturer has a specific recommendation for tire size, although Pirelli was a bad choice, I have to thing maybe they got the size right???
The salesman has agreed to replace them & I have decided that since the originaly wore the best, but rode horribly.
I plan to go with the original size 255/50R-20 tires (V-rated), but cant quite decide which to go with, for the best even-wearing, traction, control, smoothness, etc.
Here are the two I'm considering:
The same Yokohamas (but OEM size this time)
http://www.yokohamatire.com/tires/parada_specx.aspx
or
Goodyear Eagle RS-A (OEM size)
http://www.goodyeartires.com/tire/eagle-rs-a/
I more than welcome any other input or advise I may not have considered.
Thanks for your time & input!
Kevin
I FINALLY wore out my factory installed 255/50R-20 Pirelli Scorpion STR tires . . . Those tires were a nightmare from the beginning (road noise, bad vibrations, etc.).
Last April, I replaced them with a little wider and better rated tire,
265/50R-20 XL 111V B Yokohama Prada Spec X tires
The salesman recommended the wider tire for better wear, as my Pirelli tires were wearing on the inside a little unevenly, on all four.
Less than a year later (over the last couple of months) I've noticed dramatic wear on the outside shoulder of all four of the Yokohamas . . . My immediate thought was that it was either due to the alignment, faulty tires, aggressive turning, or all of the above . . . Admittedly I drive a little aggressive, but I can't imagine that being the primary culprit . . . Regarding the alignment, I've actually had 4 in the last year and a half, with no major adjustments, major part failures, etc. . . .
The salesman denied that it was the tires, but worked with me on a price for replacement . . . We agreed on a price & he encouraged me to go even bigger on the tires to prevent this from reoccurring. He explained that the tires would have more rubber around the rim's edges, etc . . . the problem is though that he went too big and they now rub. They are
275/55R-20 XL 117V B Yokohama Prada Spec X tires
Considering I have little to know tire buying experience (mainly because I've never needed any) I have to rely on the "experts" weather they are knowledgeable or not. The salesmen have ill-advised me twice now, so my thought is that since the manufacturer has a specific recommendation for tire size, although Pirelli was a bad choice, I have to thing maybe they got the size right???
The salesman has agreed to replace them & I have decided that since the originaly wore the best, but rode horribly.
I plan to go with the original size 255/50R-20 tires (V-rated), but cant quite decide which to go with, for the best even-wearing, traction, control, smoothness, etc.
Here are the two I'm considering:
The same Yokohamas (but OEM size this time)
http://www.yokohamatire.com/tires/parada_specx.aspx
or
Goodyear Eagle RS-A (OEM size)
http://www.goodyeartires.com/tire/eagle-rs-a/
I more than welcome any other input or advise I may not have considered.
Thanks for your time & input!
Kevin
Last edited by a moderator: