Jason McPhail
Member
Anyone else have a problem with the window moldings on the rear power window coming down with the window? Also the trim/molding above the rear doors sagging?
Anyone Else- Problem with window moldings
- Thread starter Jason McPhail
- Start date
Help Support Ford SportTrac Forum:
- Joined
- Sep 21, 2003
- Messages
- 22,489
- Reaction score
- 814
- Location
- Long Island, NY
- What engine do you have?
- V8 engine
- What year is your Sport Trac?
- 2010
- What Generation is your Sport Trac?
- 2n Gen Owner
Fire,
I had the issue with the molding sagging. Did any one install an alarm or stereo??
You can simply get the yellow weatherstripping adhesive and re glue it up..
As far as the window, They make window guide lube that you can spray in the track so the window doesn't stick to it. You also can glue that stripping back into the doors as well..
Todd Z
I had the issue with the molding sagging. Did any one install an alarm or stereo??
You can simply get the yellow weatherstripping adhesive and re glue it up..
As far as the window, They make window guide lube that you can spray in the track so the window doesn't stick to it. You also can glue that stripping back into the doors as well..
Todd Z
Stephane Bolduc
Active Member
Yes, I've been living with both problem. I had the back window fixed while it was still on warranty, but the problem came back.
I am in FL, so I can expect all my moldings so take a serious beat in the sun. I was planning to redo all moldings before next summer.
It's mostly cosmetic, so it doesn't bother me much, except that one time I got caught in a flash rain and my back window would not come back. Try to clean all the edges with a plastic scraping tool and then use some lube as Todd suggested.
I am in FL, so I can expect all my moldings so take a serious beat in the sun. I was planning to redo all moldings before next summer.
It's mostly cosmetic, so it doesn't bother me much, except that one time I got caught in a flash rain and my back window would not come back. Try to clean all the edges with a plastic scraping tool and then use some lube as Todd suggested.
my rear window outside molding went into my winow and I cannot get it out. I wrote about this last fall but noone had a response. I have had duct tape over it for about 6 months now.
Ford does not sell the part. they sell the inside weatherstipping but not the outside. any suggestions? anyone know how to get the rear window out?
Ford does not sell the part. they sell the inside weatherstipping but not the outside. any suggestions? anyone know how to get the rear window out?
