J Browning
Member
Trac takes several cranks to start now. After initial cold start it is fine. You can start and stop it all day on first crank. But when you let it sit for a few hours all the pressure is gone. I replaced the pump a few years ago. I don't think it is that this time. I can do the cycle the key trick a couple times but that dosnt always work. Usually it wants to be cranked first and then the second attempt it starts.
Could it be the fuel pressure regulator? Just hit 103K miles. Where is the regulator? Pics?
I get a P0174 code every now and then too. Checked the elbows and all seem fine. I changed my fuel filter recently (100K) and banged up the little connectors pretty bad trying to get them off but I don't see leaks or anything so I don't think the pressure is leaking from there.
Changing the fuel pump is pita and I'd hate to do that again for nothing. Anyone have any ideas where I could be losing pressure while it sits?
Thanks! Jason
Could it be the fuel pressure regulator? Just hit 103K miles. Where is the regulator? Pics?
I get a P0174 code every now and then too. Checked the elbows and all seem fine. I changed my fuel filter recently (100K) and banged up the little connectors pretty bad trying to get them off but I don't see leaks or anything so I don't think the pressure is leaking from there.
Changing the fuel pump is pita and I'd hate to do that again for nothing. Anyone have any ideas where I could be losing pressure while it sits?
Thanks! Jason