O.K., I had the manual tranny in the shop for some shifting difficulties. Had a couple of forks & seals replaced (at no cost, btw, because they said that the forks should not have gone out in a yr. & a half). Checked the fuse first, and then the cable from the tranny to the brake light was made hot, and the back up lights do work. The question I have is where or how does the reverse light switch get activated inside the tranny? The workshop manual does not show this that I can find. Any help is greatly appreciated. I'll probably end up having to call the shop that did the work on Monday, but if I can get it fixed before then that would be great.
Last edited by a moderator: