Blown09

Your observation of the rub mark on the sway bar is a key point. Check the sway bar bushings. If they are shot, they will allow the bar...

It’s a spring. The more you pull( the direction to release tension on the belt) the more pressure it exerts on the belt. That said, the...

If the belt is popping off, something is out of alignment or a pulley has excessive bearing play(or an accessory)… orrr it’s option A...

I’m REALLY trying to understand the issue here….. The original belt, that wasn’t squealing-then started squealing, the same size...

From what I gathered… you noticed a squeal after an oil change. An oil change by whom? Did you check to make sure no oil was spilled on...

I may have a problem… 🤣 But 12psi feels pretty damn good tho! Everyone pray for my rods 🫣🫣

Holy old thread Batman! But there’s a couple threads around that have all the info you need for modifying shorties from the stang.

Don't disagree; I personaly\likely did the Goo+Gasket+Goo thing, because of my "Belts+Suspenders" sort of mindset, which does bit me...

I’ve done it in a pinch when I’ve had to reuse the original gasket(or what was left of it)… it’ll certainly seal up. And I’m sure the...

When it comes to metal gaskets, raised part of gasket goes towards the part being installed, IF the gasket isn’t a one-way fit. Also...

Installed a Roush Tensioner today. I got all the belt tension now!

Orrrrr… and hear me out…. Aliens. But seriously, there are only a handful of places to look, and if your mechanic can’t find it, I...

Check your driver side motor mount, and carrier bearing as well.

I’m fairly certain a capacitor discharge will clear the tables. This involves removing both positive and negative battery terminals from...

The first gen 6r80’s had some issues with wear in the valve body. There are some kits that can clean the bores up. Kinda sounds like 6th...