Home made Trani Flush Machine

[Aaron Laake 2]

Do it and let us know.



My little blurb of advice: If you were concerned about not enough pressure buildup at start, just add a quart or 2 of tranny fluid before you start. Make sure when you are done that the tranny dipstick is at the correct level.



The Hawk.

 

[Raul Avila]

Tim, I made a modification and posted it here a while back ago that has been working good for me. I cut one of the cooling line and installed a tee fitting with a ball valve. When I want to change my fluid I open the valve with the engine running & let it drain into a container, then top off the fluid. I usually do only 3qts every 5000 miles but if you wanted to you could keep flushing & adding as much as you want. At idle speed it takes about 1 minuit to do 2 quarts so it is easy to keep up with adding fluid. I also placed a screw on cap over the opening as a safety in case for what ever reason the ball valve should move. Good luck

 

[Todd Z]

AHHH.... no worries...

Todd Z

[Broken External Image]: